For Sale 3d Printed Parts

[Perfectjake]

Hi all,
some are probably aware I sell some bits on ebay for 3d printed parts.

So far I have done the centre console blanking plates pre and post FL, roof trim, switch panel to rear of centre console and repair kits for the defroster vents.

Feel free to check out my ebay store for Z3 bits and let me know if you have any recommendations for parts that could be useful to model.

Security measure

www.ebay.co.uk

I'm also looking into making an aftermarket chrome pack, but we shall see how that goes.

Photos of some of the bits i make:

 

[AntStark]

This part at the back of the door trim seems to always be in demand (17)

 

[Perfectjake]

This part at the back of the door trim seems to always be in demand (17)
View attachment 310421

I'll see what I can do!

 

[BuxtonZ3Guy]

I would be interested in getting hold of the left and right covers for the locking bolts on my hardtop. My hardtop is missing these parts.

 

[Perfectjake]

I would be interested in getting hold of the left and right covers for the locking bolts on my hardtop. My hardtop is missing these parts.

Would need to get hold of some of them to make a model of them, so if anyone has them and is willing to let me borrow them for a short period. I can get them made

 

[BuxtonZ3Guy]

Would need to get hold of some of them to make a model of them, so if anyone has them and is willing to let me borrow them for a short period. I can get them made

Thank you so much. I Hope someone with a hardtop is able to help. They are easy to remove. Just a couple of screws holding them on.

 

[Perfectjake]

Getting there with Chroming stuff.

So this is one of the blanking plates which has been electroplated with nickel to give a mirror finish. Need to work on the finish a bit, but nearly there!