Latest activity
Live updates
-
TiggR_R1 replied to the thread Mike’s Retrofit Aircon Cruise Heated Seats ++.MickyG, Please disregard post 161 completely. My mistake I got the relay positions confused when turning over the relay to check... -
-
Matt Barnes replied to the thread Time for an overhaul of my 1.9 '98 BMW Z3 Individual.well the weather has put paid to doing anything today.... hoofing it down earlier and blowing a hoolie.....cover got pulled off by the... -
-
Pond replied to the thread Codes help.If you clear the codes and they come straight back it means the faults are still there, so the issue is 'live'. -
Devon Z replied to the thread Codes help.That’s pretty much what I thought 😳😳😁😁 Wow thanks for the detailed response, you really need to try and sleep at night though 😁 As I... -
colb replied to the thread Trouble finding correct wheel speed sensor..https://www.realoem.com/bmw/en/showparts?id=CN33-USA-06-2002-Z3-BMW-Z3_25i&diagId=33_0998 This shows up as a USA car in real oem are... -
Smudgemanuk replied to the thread Driveshaft Clunk??.AHH! I thought we might finally be getting somewhere! -
Smudgemanuk replied to the thread Trouble finding correct wheel speed sensor..Did you match the part numbers when buying the part? Find the part you are looking to replace on RealOEM.com and then use that part...
-
KKwinterowd posted the thread Trouble finding correct wheel speed sensor. in Z4 & Z4 M Roadster & Coupé Knowledgebase.I went to change my LR wheel speed sensor and found the alignment fins in the connector is different than the OEM. 2002 2.5 Roadster.
-
Althulas replied to the thread Codes help.In the AI responses it did give a few hits on similar issues, give it a try at least a starting point of things to look at. -
Althulas replied to the thread Codes help.In the same ‘conversation’ I inputted your other two codes BMW Code 76 (Speed Sensor, Signal Interference) indicates that your ABS/ASC...
-
Althulas replied to the thread Codes help.2. Wiring or Connector Issues Corroded pins at the ABS module block or a break in the CAN bus wiring harness can cause data loss. [1, 2...
-
-
Althulas replied to the thread Codes help.I googled your codes and got… A BMW Z3 code 94 (ASC/DSC: CAN data fault from DME/DDE) means your traction control module (ABS/ASC) has...
-
-
NNeil Wilson replied to the thread Rear dif mount bush..Picked my car up from local garage today having had the new AKG polyurethane bush fitted, mechanic said it was easy enough to fit, I...
-
So first off no lights no issues driving/braking just thought I would try my recently acquired code reader, pulled these that will not...
-
