Odometer brightness

[Z3newbie!]

Quick question is it possible to increase the brightness of the odometer as I can barely see mine?
Thank you.

 

[Althulas]

Have you tried turning the light switch knob that acts as a dimmer? If that’s working fine you will need to pull the cluster and check the bulbs you possibly may have one blown. How to here https://zroadster.org/threads/instrument-cluster-removal.8397/

 

[Z3newbie!]

The headlight pull does not adjust the brightness of this so I presume I am going to need to remove the instrument cluster and change the bulb, whcih bulb does it need behind the mileage?

 

[bertiejaffa]

The headlight knob SHOULD adjust the brightness by turning it. Often the adjustable coil inside get caked in crap over time though and doesnt work properly

 

[bertiejaffa]

same as mentioned before - search google for the fault and zroadster.org - plenty of hits like this one https://zroadster.org/threads/headlight-switch-be-warned.18748/

 

[t-tony]

The dimmer switch works on the Speedometer and "clocks" in general but not the Odometer specifically as such. New bulb(s) needed.

Tony.

 

[Z3newbie!]

The knob adjusts the instrument cluster, I think there must be a bulb out so need to replace.

also noticed the bulb behind the heater controls must also have gone out!

 

[bertiejaffa]

The knob adjusts the instrument cluster, I think there must be a bulb out so need to replace.

also noticed the bulb behind the heater controls must also have gone out!

Yeah, as Tony mentioned, the knob controls all of them - sorry I forgot to ask that - so yeah it must be a bulb. Bulbs for the heater are available from BMW, its a nice fiddly job to replace them though, I hope you have small hands. Theres plenty posts on here about how to do it (there are 2 bulbs if I remember rightly)

 

[Pond]

The headlight pull does not adjust the brightness of this so I presume I am going to need to remove the instrument cluster and change the bulb, whcih bulb does it need behind the mileage?

There are two 1.5 watt bulbs for the display. They are beige, all the other bulbs are black (1.2w).
It may be an idea to check all the other bulbs aswell while the cluster is removed (cos it's a pain to do).
I have two working bulbs you can have for postage, as well as some spare black bulbs for the other lights, if you want them.

 

[Z3newbie!]

There are two 1.5 watt bulbs for the display. They are beige, all the other bulbs are black (1.2w).
It may be an idea to check all the other bulbs aswell while the cluster is removed (cos it's a pain to do).
I have two working bulbs you can have for postage, as well as some spare black bulbs for the other lights, if you want them.
View attachment 334073

That is very good of you, thank you!